Skip to main content

Vicky Twenty - building a Vic-20 from (mostly) new parts. Part two - progress

 T

his part of the board is looking very industrial:

Although this board is simpler in some respects than the sixtyclone,  check out the number of components packed into this area:
I had been worried about soldering those particular components neatly with many of them being stood to attention, but I'm pleased with how it's looking.

Note the missing video socket. I did order the 5-pin socket, but have since decided to fit an 8-pin one (3 pins obviously won't go through the pcb and will have to be removed/bent) because I eventually plan to make the s-video mod and it'll be nice to use the same lead that I use with C64's - I'll should be able to make the extra s-video connections onto the back of the socket.

Comments

Post a Comment

Popular posts from this blog

RC2024/10 - my entry

A while ago I made this MIDI module for RC2014: It works but a better design would have its own serial chip and port decoding.  As it is, it provides the MIDI interface and a clock signal for the second SIO2 serial port. This means that it requires a little setting up and will only work for RC2014s with an SIO2 (and port B not already used). I think people might reasonably expect it to be plug-and-play and self-contained, ie do all the serial itself. My challenge to myself is to:  learn how to connect a serial chip (probably 68B50 ACIA) to receive the incoming MIDI and to serialise outgoing MIDI design the module, including the port decoding write a library so that it can easily be used on any RC2014. Potential applications include a MIDI sequencer and using incoming MIDI to trigger notes on the AY or SID sound chips. Entering the Retro Challenge 2024 (aka RC2024/10)  has given me an incentive to get on with this! I'm happy to see several more entries in the RC2014 catego...

IM53 8080 birthday cake

 Each year I've been trying to get more creative with ideas for Spencer's birthday cake. The plan this year was to incorporate LEDs in place of candles. I eventually settled on an Altair / IMSAI / PDP -style computer since those are the type of computers that inspired his RC2014. The IMSAI 8080 has the most colourful switches as well as a name that I could twist. The thought that it could show randomly flashing lights (as if the computer were running) and that it could also play a game of 'kill the bit' was very appealing. A plan formed to use a capacitive touch pad on the cake itself. The first job is to bake the fruitcake. I often use a 7" square tin and one of those cut in half and rearranged makes a cake of suitable proportions.  Even after taking a slice off the faces to make them nice and square, there are still some rounded corners, so after putting on the marzipan, I used more marzipan as a filler to flatten the whole thing. Even though I wanted to end up w...

Using the Speccy BEEP routine and a beeper speaker on my Orton 3C

W hen I first learned about the Orton 3C and its very clever serial routine which toggles A15 (meaning that the max 32k of ram appears twice in the address space) I've wanted to repurpose this for driving a beeper speaker, just as you might have done with the early PETs*  I'm writing this post after successfully playing a tune. The video is embedded near the end of this blog post if you'd like to skip straight to that. Yes, it certainly would be possible to toggle a pin on the digital i/o by 'out'ing to port zero. This would potentially allow for 'bit-banging' multiple voices, with a lot more work than I've put in so far. However, what I love about the Orton 3C is the 'bare bones'ness of it. The whole point is that it can work using only three chips and to that end I've unplugged my digital i/o for this. I didn't go to the trouble of removing the port zero protection shim (3C-PO) but its one logic chip isn't being used here since I...